Tile showers are primary in everyone’s washrooms nowadays. However, the grout between the tiles can become worn and stained over the long run. On the other hand, it could even begin to crumble. The time has come to regrout it if your shower shows signs of wear. It is important to do so to keep up with the beauty of your shower. You have a delightful house, yet it would be a pity if your shower looks worn out because of grout that is falling off. So, you can follow these simple and easy-to-follow instructions to achieve the best results. And maintain the shimmering beauty of your shower for years.

Let us take you through the correct method for having your shower regrouting done.

1 – Signs It is Time to Regrout

It is necessary to understand when your shower needs regrouting. So, let us identify the situation when you might need to consider regrouting your shower.

a – Crumbling Grout

It is time for an update on whether your grout is falling apart or missing entirely.

b – Visible Cracks

The cracks in the grout can compromise the integrity of your shower walls.

c – Stains and Discoloration

You should consider getting the grout changed if it is severely stained or discoloured. It should be your priority if it does not respond to cleaning efforts.

d – Water Damage

Water seepage due to damaged grout can lead to mold and rot. This is the time you should get regrouting done.

e – Loose Tiles

Usually, it is the issue of grouts if your bathroom tiles are shifting or falling off.

2 – Preparing for Regrouting

a – Cover the Drain

You can tape or use a drain plug to prevent debris from clogging the pipes.

b – Protect Surfaces

Try covering it with a drop cloth to prevent scratches if your shower has a porcelain floor or tub.

c – Remove Hardware

You must take off any hardware to avoid damage during the process.

3 – Finding the Right Grout

You can take a chunk of existing grout to the store to get the matching one for your shower. You must choose durable sanded grout when it comes to larger grout lines. And you must opt for unsanded grout if your grout has smaller lines. This way, you will be able to find the right grout when you are preparing a regrouting for your shower.

4 – The Regrouting Process

a – Remove Old Grout

You should use a grout saw or utility knife to carefully remove the old grout. Then, clean out the joints thoroughly.

b – Mix New Grout

You must follow the manufacturer’s instructions. And always aim for a consistency that is easy to work with.

c – Apply the New Grout

You should use a trowel or spreader when you are applying new grout. You must work diagonally to ensure all the joints are filled.

d – Wipe Excess Grout

You must use a damp sponge to wipe off excess grout. Try using a clean cloth to clean the buff tiles.

e – Seal the Grout

You should apply grout sealant to it to protect it from moisture at the time of shower regrouting.


Regrouting your shower is a rewarding project that spruces up your washroom. What is more, it additionally assists in preventing leaks. Thus, get your tools and put on your creative cap to change your shower into a shimmering beauty. You will have your shower looking brand new in a matter of seconds with a bit of patience and attention to detail.